Contributor: Odinekachukwu Ishicheli
Martyn Williams of IDG reports on the new technology in mobile batteries. In his words:
Researchers at Stanford University have developed a new battery that can be recharged in about a minute and is safer than the lithium-ion cells used in everything from smartwatches to passenger jets.
It could one day mean super-fast charging of smartphones and other gadgets.
Modern mobile technology may have been born with the first iPhone, a quintessential consumer device,
The battery uses aluminum-ion cells, which are much cheaper than lithium-ion. They’re also high performance and are not prone to bursting into flames or exploding when damaged, as lithium ion batteries can do.
“Our new battery won’t catch fire, even if you drill through it,” said Dai Hongjie, a professor of chemistry at Stanford. His work is detailed in the April 6 issue of Nature.
Research on aluminum-ion batteries isn’t new, but a sticking point to a commercial product has always been finding suitable materials for the anode and cathode that maintain their performance over repeated charge and discharge cycles.
“We accidentally discovered that a simple solution is to use graphite,” said Dai.
The result is a battery that can survive 7,500 charging cycles without losing performance. That’s well over the roughly 100 cycles that other prototype aluminum-ion batteries can last at present and also more than the typical 1,000 cycles from current lithium-ion batteries, according to the university.
The prototype developed by Dai’s team combines an aluminum anode with a graphite cathode in a pouch of an ionic liquid electrolyte, which means the battery is also flexible. That’s an attractive feature for electronics companies that are looking to squeeze batteries into tiny open spaces inside products, and for car makers that want to layer batteries around curves inside the body of automobiles.
So what’s the catch?
The current prototype produces about 2 volts, which is less than the 3.6 volts from a conventional lithium-ion battery, and its energy density — the amount of electrical energy stored in a given unit of mass — is also lower. The aluminum-ion battery developed by Stanford has an energy density of 40 watts per kilogram compared to between 100 and 260 watts per kilogram for lithium ion.
But the Stanford team is optimistic that these problems can be overcome.
“Improving the cathode material could eventually increase the voltage and energy density,” said Dai. “Otherwise, our battery has everything else you’d dream that a battery should have: inexpensive electrodes, good safety, high-speed charging, flexibility and long cycle life. I see this as a new battery in its early days. It’s quite exciting.”